Radial JCR Studio Reamper

The Reamp JCR is a high-performance passive Reamper that gives you the ability to take a pre-recorded track and send it through a guitar amp or pedal chain, allowing you to explore new sonic textures and experiment with microphone placement, amp and pedal settings without limit. The JCR utilizes the original Reamp circuit designed by recording industry legend John Cuniberti, providing exceptional audio quality that preserves every detail of the original recording while optimizing it to feed amplifiers and effects pedals. The Radial Reamp JCR is the latest version of the original Reamp that was designed and patented by John Cuniberti. It features a 100% passive design with John's original custom wound 'Made in the USA' transformer and circuit. The latest Radial version features separate XLR and ¼" TRS input connectors, variable output level plus a three-position filter that lets you tame excessive highs, warm up the lows or simply bypass if you want to revert to the original circuit. An on-board mute function has also been added to allow you to shut off the signal going to the amps when making adjustments or moving mics around the studio. JCR Features Input: 1/4" TRS Input, Connects from your recording workstation and is sutiable for both Z and hi-Z sources. Wired in parallel with the XLR. Output: 1/4" Unbalanced instrument level output connects from the JCR to amps and effets. Transformer isolated to eliminate hum and buzz caused by ground loops. Mute: Silences the 1/4" output for the JCR Filter: 3-position switch with high-cut to warm overly bright amps, low cut to clean up low endmud or bypass to back to the orginal reamp circuit. Level: Used to control the signal level going from the JCR to the guitar or bass amplifier.

Availability verified during our latest store check. If the item isn't on the shelf when our courier arrives, the order is cancelled and you are refunded in full.