Radial PZ-Pro - Acoustic D.I.

Take complete control over your tone, EQ settings, and effects with the PZ-Pro, a two channel instrument preamp, DI and switcher. Each channel features a separate equalizer strip complete with a filter section to reduce feedback on stage. The second channel of the PZ-Pro also features a microphone input to allow any dynamic or condenser microphone to be used, including clip-on instrument mics. Three footswitches provide the ability to toggle between each input channel, activate a built-in booster and an effects loop, or mute the signal for silent tuning on stage. Specifications Audio circuit type: Proprietary active circuit Number of channels: 2x Inputs, Mono Pre and Post EQ XLR balanced Out Frequency response: 20Hz-20kHz (+/-0.5dB) Gain: +20dB (Instrument Input), +55dB (Mic Input) Clip Level: +10dBu @ XLR output Total harmonic distortion: <0.005% @ 1kHz Input Impedance: 220k Ohm at input jack (10meg Ohm when PZ Boost active) Output Impedance: 1k Ohm Noise: -91dB Features 180° polarity reverse, Ground lift, Effects Loop, EQ Control, Boost Input Connectors: 1/4" instrument, XLR microphone Output Connectors: Pre and Post EQ XLR, 1/4" Amp out Extras: 1/4" Effects Loop, Boost, Tuner General Construction: 14-gauge steel Weight: 5.0lbs (2.27kg) Shipping size (L x W x D): 9.10"l x 5.32"w x 1.82"h (231 x 135 x 46mm) Power: 15VDC 400mA, center-pin positive Conditions: For use in dry locations only between 5°C and 40°C

Availability verified during our latest store check. If the item isn't on the shelf when our courier arrives, the order is cancelled and you are refunded in full.